Call Today!(877) 709-PURE
877-709-PURERequest a Call
Home › Florida › Fort Myers

Water Treatment in Fort Myers, Florida

Designed for Florida city water, and coming to Fort Myers, Florida through approved SolarPure dealers.

Availability

SolarPure is coming to Fort Myers, Florida through approved SolarPure dealers

SolarPure does not send its own crews to Fort Myers, Florida. Here the system is sold, installed and serviced by approved, independent SolarPure dealers, who set the installed price for this market. Leave your details or call, and we will connect you with an approved dealer as soon as one is available in your area.

The difference

Why ours runs on the sun

Every SolarPure™ system carries its own solar panel. That one design choice is why it costs nothing to run and why it goes places other systems cannot.

1

Its own solar panel

The panel ships with the system. Nothing to wire into the house, nothing shared with another circuit.

1 hr

Of daylight a day

That is all it takes to recharge the long life NiMH battery backup that holds your settings.

$0

On your power bill

It adds nothing to what you pay the utility, and it installs where there is no outlet.

The drinking water stage

Ultrafiltration at the kitchen sink, with nothing going down the drain

The SolarPure Complete system adds a three stage direct-connect filter under the kitchen sink. It plumbs inline with the cold water line you already have, it needs no drain connection and no separate faucet, and it holds better than a gallon and a half a minute so the tap still behaves like a tap.

1

Sediment filter

5 micron polypropylene

Catches the dirt, rust, scale and silt that come down the line before any of it reaches the finer stages.

2

Carbon block

0.5 to 1 micron premium carbon

Adsorbs chlorine and chloramine, volatile organic compounds, lead and the odors that ride along with them.

3

Ultrafiltration

0.01 micron hollow fiber

A physical barrier tight enough to block bacteria, viruses, parasites and microplastics, while the natural minerals pass straight through.

Nothing goes down the drain

Reverse osmosis runs cross-flow, which means it constantly sends water across the membrane to keep it clean and straight down the drain. Ultrafiltration is forward-flow, so every drop that enters the system comes out of your tap.

No wasted water on your bill

A standard reverse osmosis system sends two to four gallons down the drain for every gallon it gives you to drink. A direct-connect ultrafiltration system wastes none of it.

No drain connection, so far less to leak

Reverse osmosis needs a drain saddle clamped onto the trap under your sink, and that pressurized tap into a thin waste line is a common cause of slow cabinet leaks nobody notices for months. Ultrafiltration needs no drain line at all.

Water that still tastes like water

Reverse osmosis strips everything down to 0.0001 microns, including the calcium and magnesium that give water its taste, which is why it often comes out flat and slightly acidic. Ultrafiltration stops at 0.01 microns, which blocks what you want blocked and leaves the minerals alone.

What you are up against

An honest look at what is in Fort Myers, Florida water

Florida sits on limestone aquifers, which means hard water is close to universal across the state. On top of that the utility has to chlorinate the supply before it reaches you, which is what you taste in a glass of water and smell in a hot shower, and in some neighborhoods older city distribution mains can contribute iron that shows up as orange staining on sinks, tubs and laundry.

Hard water scale and mineral crust built up on a chrome bathroom faucet

Scale builds up on everything

Hard water leaves a mineral crust on faucets and shower glass, and the same thing is happening inside your water heater where you cannot see it.

A single water droplet falling into still water, forming concentric rings

Chlorine is in there by design

The utility has to disinfect the supply before it reaches you, so chlorine goes in at the plant and it is still there at your tap, in the glass and in the shower.

A clear glass being filled with clean drinking water

Drinking water gets handled too

The Complete system adds three stage ultrafiltration at the kitchen sink, so the water you cook with and drink is treated separately and properly.

What is in the tank

Four media beds and four fail-safes

These are the same media a water treatment professional would specify to build this properly, in a tank where the failure modes have been designed out rather than covered by a warranty claim.

Catalytic activated carbon, the stage 1 media inside a SolarPure system
Stage 1

Catalytic activated carbon

Catalytic carbon filters out the chemical chlorine and chloramine the city adds, clearing up the bad taste and smell that come with them.

Ion exchange resin, the stage 2 media inside a SolarPure system
Stage 2

Ion exchange resin

Ion exchange resin pulls out the hard minerals that leave white crust on your faucets and shower glass, and that wear out your water heater.

KDF, the stage 3 media inside a SolarPure system
Stage 3

KDF

KDF helps reduce heavy metals and the iron some older city distribution mains can contribute, the kind that shows up as orange staining, and helps keep bacteria from growing inside the tank.

Garnet gravel, the stage 4 media inside a SolarPure system
Stage 4

Garnet gravel

Garnet gravel sits at the bottom and keeps water moving freely through the tank, helping hold your water pressure where you are used to it.

Build and fail-safes
Self-cleaning control valve
Cleans itself for maximum performance and long service life. High flow rates keep pressure up when more than one fixture is running.
Automatic bypass during regeneration
The system steps aside while it regenerates, so the house never loses water mid-cycle.
Tank-within-a-tank construction
Fail-safe by design rather than by warranty claim.
Brine float overflow protection
A float shuts the brine tank down before it can overflow onto the floor.
Solar panel and NiMH battery backup
One hour of daylight a day keeps the battery charged and the program settings held.
Better Business Bureau Accredited Business, A+ rating Rated A+ by the Better Business Bureau Made in the USA Florida Water Quality Association
Questions

Frequently asked questions

What does a SolarPure system cost in Fort Myers, Florida?

In Fort Myers, Florida the system is sold and installed by approved SolarPure dealers, who set the installed price for this market. Leave your details or call 877-709-PURE, and we will connect you with a dealer as soon as one is available in your area.

Does somebody have to come to my house before I get a price?

No. A quick phone call is all it takes. If you’d prefer someone to come out first, we’ll arrange a visit. Nobody comes to sell you anything.

Is the water hard in Fort Myers, Florida?

Florida sits on limestone aquifers, which means hard water is close to universal across the state. On top of that the utility has to chlorinate the supply before it reaches you, which is what you taste in a glass of water and smell in a hot shower, and in some neighborhoods older city distribution mains can contribute iron that shows up as orange staining on sinks, tubs and laundry. A SolarPure system is designed, sized, installed and supported for Florida city water conditions.

Is SolarPure for homes on city water?

Yes. SolarPure is sold and installed for homes on a municipal water supply.

Does SolarPure use salt?

Yes. SolarPure uses salt as part of the softening process, because hardness minerals have to be removed, not wished away. The difference is in the system design, sizing, media, setup and support. The goal is better Florida city water, less scale, less chlorine impact, and a system built around the conditions found in Florida homes.

Why do some store bought water systems cost less upfront?

Some systems sold through national retailers or warehouse clubs look less expensive at first because the equipment is priced separately from the installed cost. Once installation, materials, upgrades, financing, service limitations and your local water conditions are added in, the final number is often much higher than the shelf price. There is also a part most homeowners never see. National retail and warehouse programs can have several layers between the manufacturer, the retailer, the dealer, the installer, the finance company and the service provider, and each layer has to be paid. That can raise the real cost to you while the equipment still looks inexpensive on the shelf. A SolarPure system is designed, sized, installed and supported for Florida city water conditions, at one published installed price.

Is financing available?

Yes. You can apply by text and get an answer within a few minutes, so call 877-709-PURE and we will send you the link while we are talking.

Who actually does the installation?

An approved, independent SolarPure dealer, not SolarPure directly. We will connect you with one as soon as one is available in your area.

Get started

Let’s talk about your home in Fort Myers, Florida

The price is published. Tell us where you are and we’ll call to talk it through, or arrange a visit if you’d prefer.

SolarPure Water Treatment Systems®

The original solar-powered whole home water treatment system. Softer, cleaner, better-tasting water at every tap, powered by the sun.

Contact

4205 St. Johns Parkway

Sanford, FL 32771

Phone: +1 877 709 7873

Email: info@solarpureusa.com

Explore

Home

Pricing

Get Started

Become a Dealer

Privacy Policy

SMS Terms

Call 877-709-PURERequest a Call